Yo! I’m a supplier of corded vacuum cleaners, and I get a ton of questions from customers about their machines all the time. One of the most common ones is, "How do I check if the motor of a corded vacuum cleaner is working?" Well, I’ve got you covered. In this blog, I’ll share some simple ways to figure that out. Corded Vacuum Cleaner
1. The First Look: Visual Checks
Before we get into the technical stuff, let’s start with a quick visual inspection. It’s like taking a first glance at a problem to see if anything’s obvious.
First off, unplug the vacuum cleaner. Safety first, right? You don’t want to accidentally get a shock while checking the motor. Once it’s unplugged, take a look at the power cord. Check for any signs of damage, like cuts, frays, or exposed wires. If you see any of these, that could be the reason the motor isn’t working. A damaged cord might not be able to supply power to the motor properly.
Next, open up the vacuum cleaner’s housing if you can. Some models have easy – access panels that let you peek inside. Look at the motor itself. Check for any signs of overheating, like a burnt smell or discoloration. If the motor looks blackened or smells like something’s burning, it could be a sign of a serious problem. Also, look for any loose wires or connections around the motor. Sometimes, a loose wire can prevent the motor from getting power.
2. Power It Up: Basic Electrical Checks
If the visual inspection doesn’t turn up anything obvious, it’s time to do some basic electrical checks. But remember, if you’re not comfortable working with electricity, it’s best to call a professional.
First, plug the vacuum cleaner into a working electrical outlet. Make sure the outlet has power by plugging in another device, like a lamp. If the lamp works, then the outlet is fine.
Once it’s plugged in, turn on the vacuum cleaner. Listen carefully. If you hear a humming sound but the vacuum cleaner isn’t sucking, it could mean the motor is trying to start but there’s a problem. Maybe the belt that connects the motor to the brush roll is broken, or there’s a blockage in the airflow.
If there’s no sound at all when you turn it on, there are a few things you can check. First, look at the on – off switch. Sometimes, the switch can go bad. You can try wiggling it a bit to see if that makes a difference. If it does, the switch might need to be replaced.
Another thing to check is the fuse or circuit breaker. Some vacuum cleaners have a built – in fuse that can blow if there’s an electrical problem. Check the user manual to find out where the fuse is located. If the fuse is blown, replace it with a new one of the same rating. If your vacuum cleaner has a circuit breaker, try resetting it. Usually, you just need to press a small button on the breaker.
3. Use a Multimeter
If you want to get a bit more technical, you can use a multimeter to check if there’s power going to the motor. A multimeter is a handy tool that can measure voltage, current, and resistance.
First, make sure the vacuum cleaner is unplugged. Set your multimeter to the voltage setting. Then, locate the wires that go to the motor. You might need to refer to the user manual to find them. Connect the multimeter’s probes to the two wires leading to the motor.
Next, plug the vacuum cleaner in and turn it on. The multimeter should show a voltage reading. If it shows zero volts, it means there’s no power getting to the motor. There could be a problem with the wiring, the switch, or the power cord.
If the multimeter shows the correct voltage but the motor still isn’t working, the problem is likely with the motor itself. It could be worn out, damaged, or have a mechanical issue.
4. Mechanical Checks
Sometimes, the problem isn’t electrical at all but mechanical. The motor might be working, but something else is stopping the vacuum cleaner from functioning properly.
Check the brush roll. If it’s not spinning, it could be blocked by hair, string, or debris. You can usually remove the brush roll by taking off a cover or a couple of screws. Once it’s out, clean it thoroughly. Make sure the bearings are in good condition and that the belt is properly attached.
Also, check the hoses and attachments for blockages. A blocked hose can cause a lot of problems, including reduced suction and overheating of the motor. Use a long, thin object like a broomstick or a plumber’s snake to clear any blockages.
5. When All Else Fails: Call a Professional
If you’ve tried all these steps and still can’t figure out what’s wrong with the motor, it’s time to call in a professional. A trained technician will have the tools and expertise to diagnose and fix the problem.
They can do more in – depth electrical and mechanical tests. They might also be able to tell if the motor needs to be repaired or replaced. And if it turns out that the vacuum cleaner is beyond repair, they can give you advice on getting a new one.
Conclusion
Checking if the motor of a corded vacuum cleaner is working doesn’t have to be a huge headache. By doing some simple visual and electrical checks, you can often figure out what’s wrong. And if you’re not comfortable doing the checks yourself, don’t hesitate to call a pro.
Floor Sweeper As a corded vacuum cleaner supplier, I know how important it is to keep your vacuum cleaner in good working condition. If you’re in the market for a new corded vacuum cleaner or need any parts for your existing one, drop me a message. We’ve got a wide range of high – quality products that are built to last. Let’s talk and see how we can meet your cleaning needs!
References
- "Vacuum Cleaner Repair Manual" – A general guide on vacuum cleaner maintenance and repair.
- "Electrical Safety Handbook" – For safety tips when working with electrical appliances.
- Manufacturer’s user manuals of various corded vacuum cleaners.
Zhejiang Meare Smart Tech Co., Limited
Zhejiang Meare Smart Tech Co., Limited is one of the most experienced corded vacuum cleaner manufacturers and suppliers in China, also supports customized service. Please feel free to wholesale durable corded vacuum cleaner in stock here from our factory. Contact us for pricelist.
Address: No.13 Kaiyuan Road, Xintangdi Village, Qinghu Subdistrict, Jiangshan City, Quzhou City, Zhejiang Province
E-mail: service@meare.cn
WebSite: https://www.mearesmart.com/
